Hydraulic Gear Motors




GM-F10

Model GM-F10 Gear Motor is constructed of an all-aluminum body and end plates and is available in 8 displacement sizes from 0.08 to 0.48 in³/rev (1.3 to 8.0 cm³/rev). The standard mounting flange is an SAE AA - 2-bolt; standard ports are SAE-6 inlet and SAE-6 outlet; and the drive shaft is a 1/2" diameter straight shaft with 1/8" key.

   F10 Gear Motor Catalog Page



GM-F20

Model GM-F20 Gear Motor is constructed of an all-aluminum body and end plates and is available in 11 displacement sizes from 0.24 to 1.52 in³/rev (4 to 25 cm³/rev). The standard mounting flange is an SAE "A" - 2-bolt. The drive shaft is a 5/8" diameter straight shaft with 5/32" key.

   F20 Gear Motor Catalog Page



GM-GC

Model GM-GC Gear Motor has a heavy duty car iron construction and is available in 6 displacement sizes from 0.067 to 0.519 in³/rev (1.06 to 8.47 cm³/rev). The standard mounting flange is a 4-bolt with a 1.78" pilot. SAE ports and a 1/2" diameter straight shaft 1/8" key are standard.

   GC Gear Motor Catalog Page